Habasit TM120LR-B Conveyor Belt 14″ Width 15′ 6″ Length Hytrol OEM. Mass of belt (belt weight): 4.4 kg/m² 0.9 lbs. Ft Nosebar Radius (minimum): mm in. Pulley diameter (minimum): 40 mm 1.6 in. Pulley diameter minimum with counter flection: 70 mm 2.8 in. Tensile force for 1% elongation (k1% static) per unit of width (Habasit standard SOP3- 064): 12 N/mm 69 lbs. Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181): 9 N/mm 51 lbs. Admissible tensile force per unit of width: 10 N/mm 58 lbs. Operating temperature admissible (continuous): Min -23 Max 91 °C °C Min -10 Max 195 °F °F Coefficient of friction on slider bed of pickled steel sheet: 0.3 [-] 0.3 [-] Seamless manufacturing width: 1828.8 mm 72 in. All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity, per ASTM standards, and are based on the Master Joining Method. Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. Legend No calculation Value 2 Product containing different coating materials such as elastomer, natural fibers, silicones, etc. Are not subject to the directive 2002/72/EC 3 CLA: Coordination of the centre line-average value Ra in the US also Arithmetical Average (AA) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. German federal institute for risk assessment (Bundesinstitut fuer Risikobewertung) EEC European Economic Community EU European Union (Directive 2002/72/EC) FDA Food and Drug Administration NA Not available NAP Not applicable USDA United States Department of Agriculture Food Safety and Inspection Service, Washington D. Product Liability, Application Considerations If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer. All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice. BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES.